High prevalence of stress fractures and long-term amenorrhoea in high endurance female athletes: The misleading lack of correlation with bone mineral density.

Aim & objectives: Females who engage in high levels of sports have a high prevalence of menstrual cycle disorders and bone stress injuries (BSI). In this study, we determined the prevalence of menstrual disorders and fractures in female athletes and their association with bone mineral density (BMD) parameters. Material & methods: Cross-Sectional Study. Forty-one female athletes from a public High-Performance Regional Centre; 24 high-endurance athletes (HEA) and 17 other athletes, were included. To form the control group, we invited medical students from a public University. Twenty-nine non-athletes (NA) were included. A health surveys and a dual-energy X-ray absorptiometry (DXA) were conducted for all participants. Results: Among the participants (median age, 24 years; body mass index, 21 kg/m2), the percentage of long-term amenorrhoea was 42 % in HEA vs. 0 % in NHEA (OR 25.35; 95 % CI 1.37-470.50, p = 0.008) or 10 % in NA (OR 6.20; 95 % CI 1.46-26.24, p = 0.022), and the percentage of BSI was 29 % in HEA vs. 0 % in NHEA or NA. Both groups of female athletes (HEA and NHEA) showed higher Z-scores than those of NA in the femur; however, only NHEA had a significant increase in the BMD on lumbar spine than that of NA. Conclusion: The prevalence of long-term amenorrhoea and/or BSI was significantly higher in the HEA than in the NHEA or NA females. In contrast, HEA, like NHEA, had higher BMD values in the femur than those of controls. It is unlikely that DXA parameters can be used to estimate cortical BSI risk in this population.

[Risk factor control, lifestyle intervention, and prescribed medication in a cohort of patients with ischemic heart disease]. / Control sobre factores de riesgo, intervención sobre estilos de vida, y medicación prescrita en una cohorte de pacientes con cardiopatía isquémica.

OBJECTIVE: The aim of this study was to analyze the recommended prevention measures in our health area for patients discharged after a myocardial infarction. METHODS: This was a retrospective descriptive study that selected patients with acute coronary syndrome in our health area in the previous calendar year. Control of the risk factors observed at the time of the coronary event and at 1 year and medication prescribed 1 year after the episode were studied. Variables including age, sex, control of dyslipidemia, hypertension or diabetes mellitus, adherence to treatment and lifestyle habits were analyzed. RESULTS: Risk factor control was insufficient and sometimes even unassessed at the time of infarction. Although a slight improvement was perceived, control remained insufficient 1 year later. Moreover, patients, particularly women, were undertreated: one fifth (20%) more men were receiving appropriate treatment than women year after the myocardial event. CONCLUSIONS: An additional effort must be made compared to what is currently being done, both by specialists in Hospital Care and Primary Care, to carry out good control of risk factors, meaning the control of certain diseases such as diabetes, high blood pressure or dyslipidemia, as well as habits or lifestyles that increase the probability of suffering a cardiovascular event. Furthermore, it is important to avoid these cardiovascular diseases and their relapse to reinforce adherence to the prescribed treatments.

Cost analysis of next-generation imaging in high-risk prostate cancer staging.

INTRODUCTION AND OBJECTIVE: Next-generation imaging (NGI) tests, such as choline PET/CT and PSMA PET, have shown to increase sensitivity in the detection of nodal and metastatic disease in prostate cancer. However, their use implies an increase in diagnostic costs compared to conventional imaging (CI) tests such as CT and bone scan. The aim of our study was to determine which diagnostic pathway is more cost-effective in high-risk prostate cancer. MATERIAL AND METHOD: Cost-effectiveness analysis of the available imaging tests (CI, Choline/PSMA PET) for the staging of high-risk prostate cancer. Sensitivity and specificity were estimated based on published evidence, and costs were collected from the Management Department. In order to carry out a cost-effectiveness analysis, five diagnostic pathways were proposed estimating the accurate diagnoses. RESULTS: PSMA PET was the most accurate diagnostic option. The CI diagnostic workup was the most economical and CI+PSMA the most expensive. Analyzing the diagnostic cost-effectiveness ratio, CI+PSMA proved to be the most expensive (€5627.30 per correct diagnosis) followed by PET PSMA (€4987.11), choline (€4599.84) and CI (€4444.22). CONCLUSIONS: PSMA PET is the most accurate strategy in staging distant disease in patients with high-risk prostate cancer. Radiotracer uptake tests such as CI have been shown to be the most cost-effective option, followed by choline and PSMA.

Effect of hip hemiarthroplasty dislocation on mortality after hip fracture surgery. / [Artículo traducido] Efecto de la luxación de la prótesis parcial de cadera en la mortalidad tras la cirugía de fractura de cadera.

INTRODUCTION: Hip arthroplasty is the treatment of choice for displaced femoral neck fractures among the older population. The hip prosthesis dislocation is one of the most pointed potential complications after hip arthroplasty, but there is a lack of updated information on the effect of dislocation on the survival of older hip fracture patients so treated by hip hemiarthroplasty. We aim to evaluate the standalone effect of hip prosthesis dislocation after hip fracture hemiarthroplasty on patients' survival outcomes. MATERIALS AND METHODS: We conducted a retrospective multicenter study, including 6631 femoral neck fracture patients over 65 surgically treated by hemiarthroplasty. We made follow-up cut-offs 30-days, 6 weeks, 90-days, and one year after hospital discharge determining hip dislocation rate and patients' survival. RESULTS: The women population represented 78.7%, and the mean age of the population was 85.2 ± 6.7 years. Hip prosthesis dislocation incidence was 1.9% in the first 90-days after discharge, representing 91.54% of primary dislocations yearly noted. We reported statistically significant increased mortality rates of patients presenting at least one hip prosthesis dislocation event (from 16.0% to 24.6% at 90-day after discharge, and 29.5% to 44.7% at one year), and also significantly decreasing patient survival function at 90-day (P = .016) and one-year follow-up (P < .001). The recurrent dislocation events (26.15%) showed even higher mortality rates (up to 60.6%, p < .001). The multivariate Cox regression model determined that prosthesis dislocation was the only significant variable (P = .035) affecting patient survival, increasing the risk of dying before one year of follow-up by 2.7 times. DISCUSSION: Our study stands for the standalone hip prosthesis dislocation entailing a higher risk of death after hip fracture hemiarthroplasty in the older population.

Effect of hip hemiarthroplasty dislocation on mortality after hip fracture surgery.

INTRODUCTION: Hip arthroplasty is the treatment of choice for displaced femoral neck fractures among the older population. The hip prosthesis dislocation is one of the most pointed potential complications after hip arthroplasty, but there is a lack of updated information on the effect of dislocation on the survival of older hip fracture patients so treated by hip hemiarthroplasty. We aim to evaluate the standalone effect of hip prosthesis dislocation after hip fracture hemiarthroplasty on patients' survival outcomes. MATERIALS AND METHODS: We conducted a retrospective multicenter study, including 6631 femoral neck fracture patients over 65 surgically treated by hemiarthroplasty. We made follow-up cut-offs 30-days, 6 weeks, 90-days, and one year after hospital discharge determining hip dislocation rate and patients' survival. RESULTS: The women population represented 78.7%, and the mean age of the population was 85.2±6.7 years. Hip prosthesis dislocation incidence was 1.9% in the first 90-days after discharge, representing 91.54% of primary dislocations yearly noted. We reported statistically significant increased mortality rates of patients presenting at least one hip prosthesis dislocation event (from 16.0% to 24.6% at 90-day after discharge, and 29.5% to 44.7% at one year), and also significantly decreasing patient survival function at 90-day (p=0.016) and one-year follow-up (p<0.001). The recurrent dislocation events (26.15%) showed even higher mortality rates (up to 60.6%, p<0.001). The multivariate Cox regression model determined that prosthesis dislocation was the only significant variable (p=0.035) affecting patient survival, increasing the risk of dying before one year of follow-up by 2.7 times. DISCUSSION: Our study stands for the standalone hip prosthesis dislocation entailing a higher risk of death after hip fracture hemiarthroplasty in the older population.

[Translated article] Implementation of a rapid recovery protocol in total knee arthroplasty. A randomised controlled trial.

BACKGROUND: Rapid recovery (RP) in total knee arthroplasty may increase the functionality while reducing costs. The aim of this study is to prove the benefits of a rapid recovery programme compared to our classic protocol. PATIENTS AND METHODS: We performed a RCT (NCT03823573) in patients undergoing otal knee arthroplasty. Intervention group (RP protocol) received local infiltration of levo-bupivacaine in the periarticular tissue and supervized ambulation 4-6h after surgery. Control (C) group received a femoral nerve block with levo-bupivacaine, while a drain was used. Ambulation after its removal. All the patients completed an Oxford Knee Score prior to surgery and 6 months after discharge. An ecodoppler to assess the presence of deep vein thrombosis was made 1 month after discharge. Minimum follow-up was of 6 months. RESULTS: A total of 175 patients were included in the trial (92 patients in the control group, 83 patients in the RP group). There were no differences in sex, age, implanted prosthesis, haemoglobin drop, need for transfusion, range of motion on discharge (C: 82.6°, RP: 85°) and at the end of the follow-up (C: 105.1, RP: 106.6), Oxford knee score improvement (C: 17.5 points; RP: 19.3 points), patient satisfaction or re-admissions at the emergency department (C: 7.6%; RP: 10.8%). Significancy was found on time of ischaemia (C: 81.29min; RP: 85.35min; p=.03), need for morphine shots (C: 19.7%; RP: 38.6%; p=.007), hospital stay (C: 3.84 days; RP: 2.54 days, p<.0001) and time until ambulation (C: 2.46 days; RP: 0.23 days; p<.0001). CONCLUSION: Rapid recovery protocols can reduce hospital stay without increasing complications or need for re-admission.

Implementation of a rapid recovery protocol in total knee arthroplasty. A randomized controlled trial. / Implantación de un protocolo de recuperación precoz en artroplastia total de rodilla. Ensayo clínico aleatorizado.

BACKGROUND: Rapid recovery (RP) in total knee arthroplasty may increase the functionality while reducing costs. The aim of this study is to prove the benefits of a rapid recovery program compared to our classic protocol. PATIENTS AND METHODS: We performed a RCT (NCT03823573) in patients undergoing otal knee arthroplasty. Intervention group (RP protocol) received local infiltration of levo-bupivacaine in the periarticular tissue and supervized ambulation 4-6h after surgery. Control (C) group received a femoral nerve block with levo-bupivacaine, while a drain was used. Ambulation after its removal. All the patients completed an Oxford Knee Score prior to surgery and 6 months after discharge. An ecodoppler to assess the presence of deep vein thrombosis was made one month after discharge. Minimum follow-up was of 6 months. RESULTS: A total of 175 patients were included in the trial (92 patients in the control group, 83 patients in the RP group). There were no differences in sex, age, implanted prosthesis, hemoglobin drop, need for transfusion, range of motion on discharge (C: 82.6°, RP: 85°) and at the end of the follow-up (C: 105.1, RP: 106.6), Oxford Knee Score improvement (C: 17.5 points; RP: 19.3 points), patient satisfaction or re-admissions at the emergency department (C: 7.6%; RP: 10.8%). Significancy was found on time of ischemia (C: 81.29min; RP: 85.35min; P=0.03), need for morphine shots (C: 19.7%; RP: 38.6%; P=0.007), hospital stay (C: 3.84 days; RP: 2.54 days, P<0.0001) and time until ambulation (C: 2.46 days; RP: 0.23 days; P<0.0001). CONCLUSION: Rapid recovery protocols can reduce hospital stay without increasing complications or need for re-admission.

Are the common sterilization methods completely effective for our in-house 3D printed biomodels and surgical guides?

INTRODUCTION: In-hospital 3D printing is being implemented in orthopaedic departments worldwide, being used for additive manufacturing of fracture models (or even surgical guides) which are sterilized and used in the operating room. However, to save time and material, prints are nearly hollow, while 3D printers are placed in non-sterile rooms. The aim of our study is to evaluate whether common sterilization methods can sterilize the inside of the pieces, which would be of utmost importance in case a model breaks during a surgical intervention. MATERIAL AND METHOD: A total of 24 cylinders were designed and printed with a 3D printer in Polylactic Acid (PLA) with an infill density of 12%. Manufacturing was paused when 60% of the print was reached and 20 of the cylinders were inoculated with 0.4 mL of a suspension of S epidermidis ATTCC 1228 in saline solution at turbidity 1 McFarland. Printing was resumed, being all the pieces completely sealed with the inoculum inside. Posteriorly, 4 groups were made according to the chosen sterilization method: Ethylene Oxide (EtO), Gas Plasma, Steam Heat or non-sterilized (positive control). Each group included 5 contaminated cylinders and 1 non-contaminated cylinder as a negative control. After sterilization, the inside of the cylinders was cultured during 7 days. RESULTS: We observed bacterial growth of just a few Forming Colony Units (FCU) in 4 out of 5 positive controls and in 2 out of 5 contaminated cylinders sterilized with Gas Plasma. We could not assess any bacterial growth in any of the EtO or Steam Heat samples or in any of the negative controls. Pieces sterilized under Steam Heat resulted completely deformed. CONCLUSIONS: High temperatures reached during the procedure of additive manufacturing can decrease the bacterial load of the biomodels. However, there is a potential risk of contamination during the procedure. We recommend sterilization with EtO for in-hospital 3D-printed PLA hollow biomodels or guides. Otherwise, in case of using Gas Plasma, an infill of 100% should be applied.

Electrochemically reduced graphene oxide on CoCr biomedical alloy: Characterization, macrophage biocompatibility and hemocompatibility in rats with graphene and graphene oxide.

Electrochemically reduced graphene oxide (ErGO) films on a biomedical grade CoCr alloy have been generated and characterized in order to study their possible application for use on joint prostheses. The electrodeposition process was performed by cyclic voltammetry. The characterization of the ErGO films on CoCr alloys by XPS revealed sp2 bonding and the presence of CO and CO residual groups in the graphene network. Biocompatibility studies were performed with mouse macrophages J774A.1 cell cultures measured by the ratio between lactate dehydrogenase and mitochondrial activities. An enhancement in the biocompatibility of the CoCr with the ErGO films was obtained, a result that became more evident as exposure time increased. Macrophages on the CoCr with the ErGO were well-distributed and conserved the characteristic cell shape. In addition, vimentin expression was unaltered in comparison with the control, results that indicated an improvement in the CoCr biocompatibility with the ErGO on the material surface. The in vivo response of graphene and graphene oxide was assessed by intraperitoneal injection in wistar rats. Red blood cells are one of the primary interaction sites so hemocompatibility tests were carried out. Rats inoculated with graphene and graphene oxide showed red blood cells of smaller size with a high content in hemoglobin.

Radiological results of surgical management of fracture of the distal radius treated with volar locking plates.

OBJECTIVES: Distal radius fracture (DRF) is the most common upper extremity fracture. The incidence of complications after surgical treatment still remains high. The objective of our study was to assess functional and radiological results of DRF treated with volar locking plate. METHODS: We conducted a retrospective study including DRF treated by open reduction and internal fixation with a volar locking plate during a period of 8 years (2010-2018). Data were collected from clinical records and included patient demographics, fracture characteristics, radiological parameters (radial inclination, palmar tilt, ulnar variance, articular step-off), range of motion (ROM), complications and reinterventions. RESULTS: A total of 170 patients (63.5% female) met the inclusion criteria with a mean age of 55.9 years [24.1-83.7; 13.76]. High energy injuries were more frequent in younger patients (25.56% vs 3.95%; p < 0.0001). AO classification was: 2R3A: 23.5%, 2R3B: 24.1% and 2R3C: 52.4%. Time until surgery was 8.5 days, longer in extraarticular fractures (AO-2R3A: 12.22 days, AO-2R3B: 7.97 days, AO-2R3C: 7.04 days, p = 0.018). Younger patients had better radial inclination (excellent in 85.1% vs 59.21%, p = 0.001) and radial shortening (excellent in 100% vs 88.15%, p = 0.001). ROM was: flexion 63° [0-90°; 19.73], extension 57.67° [5-90°; 21.61], pronation 78.94° [40-90°] and supination 81.76° [38-90°; 8.87]. We found a weak correlation between ROM in flexion-extension and radial shortening (r = 0.218; p = 0.001) and articular step-off (r = -0.269; p = 0.002). We had 39 complications (21.18% of patients). 10.6% of patients needed a re-operation, being the most frequent hardware removal (6.5%) and tendinous disruptions repairs (2.4%). Reintervention rate was higher in younger patients (14.9% vs 5.3%; p = 0.042), complete articular fractures (AO-2R3A: 2.5%; AO-2R3B: 7.3%; AO-2R3C: 15.7%; p = 0.037) and high energy injuries (8.4% vs 22.2%; p = 0.044). Patients undergoing reintervention had a decreased flexion-extension (94.44° vs 123.83°, p = 0.007). CONCLUSION: Radial shortening and articular step-off seem the most important predictors for postoperative range of motion. Worse radiological outcomes are observed in complete articular fractures and those affecting elder population. Although radiological and functional results are good or excellent in most of cases, the incidence of complications and need for reintervention still remains noticeable. Re-operations were more frequent in younger patients, complete articular fractures and high energy injuries, and it worsened functional outcomes.

Midterm results of Magnum large head metal-on-metal total hip arthroplasty. / Resultados a medio plazo de la artroplastia total de cadera metal-metal con cabeza de gran tamaño Magnum.

OBJECTIVES: We present the results of the prospective follow up of a sample of large head metal-metal total hip arthroplasty obtained after the safety alert regarding a higher incidence of revision of these implants. MATERIAL AND METHODS: All patients implanted with the Recap-M2a-Magnum cup between 2008 and 2011 were included. They were prospectively reviewed recording Harris Hip Score, clinical symptoms of chromium or cobalt intoxication. Serum levels of these ions were requested as well as X-Rays and ultrasonography. An MRI was performed in the cases of positive ultrasonography. RESULTS: Twenty-six males with a mean age of 48.54 years [32-62, SD: 7.18] were included. An anterolateral approach and Bi-Metric (7) and F-40 (19) stems were used. Cephalic diameters ranged 42-52 (mode: 46) and the mean cup inclination was 39.35° [21-59°, SD: 9.78]. During follow-up (7.3 years [5.9-9.4; SD: .78]), 3 patients (11.5%) underwent revision (2 cases aseptic loosening, 1 pseudotumour). Mean time until revision was 5.4 years [3.1-8.0; SD: 2.48]. The accumulated survival probability was 88.5% (95% CI 76.3-100%). Harris Hip Score was 94.47 [66.5-100; SD: 8.94] and the patients showed no metallic intoxication symptoms. The levels of chromium were 1.88 mcg/dl [0.6-3.9] and cobalt 1,74 mcg/dl [0.5-5,6]. One pseudotumour was found in an asymptomatic patient, and small amounts of periarticular liquid were found in 5 patients (19.2%) DISCUSSION AND CONCLUSIONS: High revision rates are still found when follow up is extended due to aseptic loosening and pseudotumour formation. MRI might not be the most adequate test to study the complications of these prostheses.

Efficacy and safety of the topical application of tranexamic acid in primary cementless hip arthroplasty: prospective, randomised, double-blind and controlled study. / Eficacia y seguridad de la aplicación del ácido tranexámico tópico en la artroplastia primaria no cementada de cadera: estudio prospectivo, aleatorizado, doble ciego y controlado.

OBJECTIVE: To evaluate the efficacy of topical tranexamic acid topical in cementless total hip arthroplasty from the point of view of bleeding, transfusion requirements and length of stay, and describe the complications of use compared to a control group. MATERIAL AND METHODS: A prospective, randomised, double-blinded and controlled study including all patients undergoing cementless total hip arthroplasty in our centre between June 2014 and July 2015. Blood loss was estimated using the formula described by Nadler and Good. RESULTS: The final analysis included 119 patients. The decrease in haemoglobin after surgery was lower in the tranexamic acid group (3.28±1.13g/dL) than in the controls (4.03±1.27g/dL, P=.001) and estimated blood loss (1,216.75±410.46mL vs. 1,542.12±498.97mL, P<.001), the percentage of transfused patients (35.9% vs. 19.3%, P<.05) and the number of transfused red blood cell units per patient (0.37±0.77 vs. 0.98±1.77; P<.05). There were no differences between groups in the occurrence of complications or length of stay. CONCLUSIONS: The use of topical tranexamic acid in cementless total hip arthroplasty results in a decrease in bleeding and transfusion requirements without increasing the incidence of complications.

IgE, IgG1 and IgG4 response to specific allergens in sensitized subjects showing different clinical reactivity to Anisakis simplex.

SUMMARY: Background. Anisakis simplex hypersensitive subjects may be sensitized without clinical allergy, or experience acute symptoms or chronic urticaria induced by raw fish. We studied whether the 3 subgroups differ in IgE, IgG1 or IgG4 reactivity to specific Anisakis simplex allergens. Methods. 28 Anisakis simplex-hypersensitive adults, 11 with acute symptoms, 9 with chronic urticaria, and 8 sensitized were studied. IgE, IgG1 and IgG4 to rAni s 1, 5, 9 and 10 were sought by ELISA. IgE and IgG4 to nAni s 4 were determined by WB. Results. IgE to Ani s 1, 4, 5, 9, and 10 were found in 8, 3, 2, 5, and 9 sera, respectively. Nine sera did not react to any allergen. IgG1 to Ani s 1, 5, 9, and 10 were detected in 5, 16, 14, and 4 sera, respectively. Four sera did not react to any of the 4 allergens. IgG4 to Ani s 1, 4, 5, 9, and 10 were detected in 10, 0, 2, 6 and 1 sera, respectively. Fifteen subjects did not react to any of the 5 allergens. On ELISA sensitized subjects showed lower IgE and IgG1 levels than patients. IgG4 levels were highest in the sensitized group. The prevalence of IgE, IgG1 or IgG4 reactivity to any of the studied allergens did not differ between the 3 subgroups. Conclusion. The clinical expression of Anisakis simplex sensitization does not seem to depend on IgE reactivity to a specific allergen of the parasite, nor on the presence of IgG antibodies possibly related with blocking activity.

Study of overall and local electrochemical responses of oxide films grown on CoCr alloy under biological environments.

The interaction of the physiological medium and living tissues with the implant surfaces in biological environments is regulated by biopotentials that induce changes in the chemical composition, structure and thickness of the oxide film. In this work, oxide films grown on CoCr alloys at 0.5 V vs Ag/AgCl and 0.7 V vs Ag/AgCl have been characterized through overall and localized electrochemical techniques in a phosphate buffer solution and 0.3% hyaluronic acid. Nanopores of 10-50nm diameter are homogeneously distributed along the surface in the oxide film formed at 0.7 V vs Ag/AgCl. The distribution of the Constant Phase Element studied by local electrochemical impedance spectroscopy showed a three-dimensional (3D) model on the oxide films grown at 0.5 V vs Ag/AgCl and 0.7 V vs Ag/AgCl. This behaviour is especially noticeable in oxide films grown at 0.7 V vs Ag/AgCl, probably due to surface inhomogeneities, and resistive properties generated by the potentiostatic growth of the oxide film.

Hip arthrodiastasis in Legg-Calvé-Perthes disease. / Artrodiastasis de cadera en la enfermedad de Legg-Calvé-Perthes.

INTRODUCTION AND OBJECTIVE: Arthrodiastasis consists of the mobilisation of the hip while distracted by a hinged distractor. The aim of our study is to show the results of the treatment of late-onset Perthes disease with this technique in our institution. MATERIAL AND METHODS: Ambispective review of all the cases that underwent this surgery in our Department of Paediatric Orthopaedics between 2010 and 2014 with the following inclusion criteria: patients over 8 years old, with minimal deformity, and poor prognosis. Mobility, pain, Trendelenburg sign, radiographic sphericity, and complications were assessed. RESULTS: A total of 13 patients (9 male, 4 female) were included. The mean age was 11.93 years. Radiographic risk signs were present in 7 cases. The mean decrease in pain measured with a visual analogue scale (VAS) after the surgery was 3.83 points (P<.05). Cephalic sphericity was maintained in 11 cases during follow up (1.75 years). Complications were observed complications in 84.6% of the patients, with infection of the screw tract being the most frequent. All of them were easy to treat. CONCLUSIONS: Arthrodiastasis is a minimally invasive technique, useful in the treatment of late onset Perthes disease. It improves clinical results and maintains cephalic shape when applied in early stages. However, it is not free of complications, which can involve as many as 8 out of 10 patients treated with the technique.

Analysis of metallic traces from the biodegradation of endomedullary AZ31 alloy temporary implants in rat organs after long implantation times.

AZ31 alloy has been tested as a biodegradable material in the form of endomedullary implants in female Wistar rat femurs. In order to evaluate the accumulation of potentially toxic elements from the biodegradation of the implant, magnesium (Mg), aluminium (Al), zinc (Zn), manganese (Mn) and fluorine (F) levels have been measured in different organs such as kidneys, liver, lungs, spleen and brain. Several factors that may influence accumulation have been taken into account: how long the implant has been in place, whether or not the bone is fractured, and the presence of an MgF2 protective coating on the implant. The main conclusions and the clinical relevance of the study have been that AZ31 endomedullary implants have a degradation rate of about 60% after 13 months, which is fully compatible with fracture consolidation. Neither bone fracture nor an MgF2 coating seems to influence the accumulation of trace elements in the studied organs. Aluminium is the only alloying element in this study that requires special attention. The increase in Al recovered from the sampled organs represents 3.95% of the amount contained in the AZ31 implant. Al accumulates in a statistically significant way in all the organs except the brain. All of this suggests that in long-term tests AZ31 may be a suitable material for osteosynthesis.

Fracture bone healing and biodegradation of AZ31 implant in rats.

The ideal temporary implant should offer enough mechanical support to allow healing of the fracture and then biodegrade and be resorbed by metabolic mechanisms without causing any toxic effect. The aim of this research has been to simultaneously study in situ bone healing and the biodegradation of AZ31 Mg alloy as an osteosynthesis material. The in vivo study was carried out in AZ31 implants with and without Mg-fluoride coating inserted in un-fractured and fractured femurs of Wistar rats for long experimentation time, from 1 to 13 months, by means of computed tomography, histological and histomorphometric analysis. Tomography analysis showed the bone healing and biodegradation of AZ31 implants. The fracture is healed in 100% of the animals, and AZ31 maintains its mechanical integrity throughout the healing process. Biodegradation was monitored, quantifying the evolution of gas over time by 3D composition of tomography images. In all the studied groups, gas pockets disappear with time as a result of the diffusion process through soft tissues. Histomorphometric studies reveal that after 13 months the 46.32% of AZ31 alloy has been resorbed. The resorption of the coated and uncoated AZ31 implants inserted in fractured femurs after 1, 9 and 13 months does not have statistically significant differences. There is a balance between the biodegradation of AZ31 and bone healing which allows the use of AZ31 to be proposed as an osteosynthesis material.

Relationships between T cell and IgE/IgG4 epitopes of the Anisakis simplex major allergen Ani s 1.

BACKGROUND: Anisakiasis is a global disease caused by the consumption of raw or lightly cooked fish parasitized with third-stage Anisakis larvae. Anisakis simplex allergens may cause severe allergic reactions including angio-oedema, urticaria and anaphylaxis. Approximately 80% of allergic patients have allergen-specific IgE against Ani s 1, and the diagnostic value of testing for antibodies to Ani s 1 has been extensively demonstrated. However, no previous studies have investigated the molecular aspects of the allergic response to Ani s 1. Knowledge of allergen-specific T cell and B cell (IgE and IgG4) epitopes is important for elucidating the immunological mechanisms underlying allergic responses, and for understanding why particular proteins behave as allergens. OBJECTIVE: To elucidate the main T cell- and B cell (IgE and IgG4)- binding regions of Ani s 1. METHODS: T cell epitopes were identified by peptide proliferation assays using T cell lines derived from peripheral blood mononuclear cells of 11 patients with Anisakis allergy, and IgE and IgG4 epitopes were identified by microarray immunoassay using sera from a different group of 11 patients with Anisakis allergy. RESULTS: Several T cell epitopes of Ani s 1 were identified, of which Ani s 1145-156 , Ani s 1151-162 and Ani s 1163-171 located at the C-terminal end of the protein were the most relevant. IgE and IgG4 recognized largely the same peptides, including Ani s 122-41 , Ani s 125-44 , Ani s 127-47 , Ani s 137-56 and Ani s 194-113 . CONCLUSIONS AND CLINICAL RELEVANCE: This is the first report describing the T cell epitopes of an important allergen of A. simplex, and the first B cell epitope study of this allergen in the Spanish population. This information can help to elucidate the mechanisms underlying the allergic response to Ani s 1, potentially leading to therapeutic and diagnostic advances.

Modeling in vivo corrosion of AZ31 as temporary biodegradable implants. Experimental validation in rats.

In this paper, two complementary approaches, mathematical modeling and experimental results are combined to identify variables that affect the in vivo biodegradation of magnesium implants. The in vivo corrosion behavior of AZ31 alloy proposed for temporary applications as fixation of bone fractures has been modeled solving the Laplace equation by finite element method (FEM). Bar-shaped AZ31 implants of 1mm diameter and 20mm length were inserted in Wistar rat femurs with and without a fracture. The presence of gas around AZ31 implants inside the femurs has been detected in situ at the epiphysis and in fractured areas by computerized tomography (CT). Examining some in vivo conditions, the model confirms that magnesium-alloy devices have different biodegradation behavior, depending on the thickness of electrolyte at the implantation site and can be used for predicting the biodegradation behavior.